0
Still curious? Ask our experts.
Chat with our AI personalities
Lao
Judy
Rafa
Add your answer:
Earn +20 pts
If your accelerator suddenly gets stuck what should you do?
Put the transmission in neutral, pull over and stop immediately (safely), turn off the engine. Do not drive the vehicle again until the problem has been rectified.Don't turn off the engine first, you will make the vehicle very hard to steer and stop. The power brakes and power steering only work with the engine running.
When hydroplaning begins press down on the accelerator and brake hard.?
When hydroplaning begins press down on the accelerator and break hard?
What should you do if your car breaks down?
If your car breaks down the highway gently and smoothly take your foot off the accelerator. Do not ever try to break hard. Then after taking off your foot to the accelerator carefully work your vehicle toward the breakdown lane or the side of the road. If you can, signal the drivers behind you that you are having a trouble in that way you will avoid any collision.
Where is vent located on Chevy 350 transmission?
There is a little metal tube stuck in the transmission. TOP SIDE It is hard to see it when it is in a vehicle.
When hydroplaning begins do you press down on the accelerator and brake hard?
No, you just hit the brakes HARD.
Slips when press accelerator hard down?
just hit it harder
To get out of a skid?
If its a front wheel drive car , you automatically push the accelerator but not to hard and turn into it not with it. A 4 wheel drive car you turn into it and press the accelerator and finally rear wheel drive you let go of the accelerator and turn into it
Why would a 1999 Sable GS sometimes lose acceleration and the accelerator pedal be hard to press?
replace the fuel filter and the accelerator cable to the throtle body
What is a power skid?
In the context of operating a motor vehicle, a power skid is what results when a driver presses down too hard and suddenly on the accelerator. A simple skid is when someone losses control over the direction in which their car is moving.
Why do cars get stuck between 1st and reverse gears?
If a transmission for a car becomes stuck between 1st and 2nd gear the fluid should be changed. Old fluid in a transmission can cause hard shifting and stuck gears.
How do you remove a stuck brake caliper from a 2008 dodge caliber?
stuck? how is it stuck? if you have removed all (4) bolts then it should slide off.. if not push hard on the caliber to depress the cylinder making it easier to slide off
When you are stuck in mud or snow you should do all the following EXCEPT?
Hit the gas pedal hard and try to steer out of the area safely
