check that choke is operating correctly
it takes 2qtsof gear oil
According to the ending of Metal Gear Solid 3, the Les Enfants Terribles project was in 1972, so we can assume that Solid Snake was born in 1972. The first Metal Gear takes place in 1995 so he would be about 23. Metal Gear 2 takes place in 1999, so he would be about 27 in that game. Metal Gear Solid take place in 2005, so he would be about 33 in that game. Metal Gear Solid 2 takes place in 2007 and 2009, when Snake would be 35 and 37. Metal Gear Solid 4 takes place in 2014, so he would be about 42 in that game.
600ml any 80cc takes
takes has long as 5 hours if you know what your doing
i have the same bike it takes 750ml of gear oil
The best way is to count the teeth on the ring gear and divide by the number of teeth on the pinion gear. Or you can count the number of turns of the pinion it takes to get one full turn of the ring gear. For example, if we divide a ring gear with 41 teeth by a pinion gear with 10 teeth we find that the gear ratio is 4.10:1 (41/10 = 4.10).
it depends if it is an automatic transmission it takes atf (automatic transmission fluid) if it's a manual it takes gear oil
The first half of Metal Gear Solid 2 is a few years after Metal Gear Solid 3 but the Riaden part is in 2009. Also it's a prequel starring Solid Snake's, and Liquid Snake's as well, father: Big Boss, althought he's known throughout the entire game as Naked Snake (his codename before earning the title of Big Boss). metal gear solid 3 is a prequel to all metal gears,mgs3 takes place in 1964 , the first part of mgs 2 takes place in 2007 second part takes place in 2009, mgs 1 takes place in2002
It is Electronic gear control. A semi automatic gear box which although takes getting use to, can return better mpg and the same performance as a manual box. The gears are changed by either paddles in the wheel or a sequential gear stick. It does not have a clutch pedal.
Three speed automatic doesnt take gear oil. It takes dexron type 2 automatic fluid.
If it is taking too long to go into gear the first thing to check is always the fluid level