Wiki User
∙ 12y agoyour spacer plate and starter should be the same the flex plate and converter will need to be replaced
Wiki User
∙ 12y agoThe Torque Converter is part of the transmission, not part of the engine. The torque converter needs to come off with the transmission. You need to remove the starter to access the torque converter bolts/nuts and separate it from the flex plate. Besides loosing all of the fluid in the torque converter, you stand to damage converter seals and/or the pump if the converter isn't properly installed in the transmission.
There are four. Starter solenoid, is built on the starter. Governor pressure solenoid, overdrive solenoid, and torque converter solenoid are on the valve body inside the transmission.There are four. Starter solenoid, is built on the starter. Governor pressure solenoid, overdrive solenoid, and torque converter solenoid are on the valve body inside the transmission.
The torque converter is between the engine and transmission.The torque converter is between the engine and transmission.
You have to remove the transmission to replace the torque converter.You have to remove the transmission to replace the torque converter.
No , just the automatic transmission has a torque converter
between torque converter and engine
The torque converter is located between the engine output shaft and the transmission. Have to drop transmission to remove.
The torque converter solenoid is inside the transmission on the valve body.The torque converter solenoid is inside the transmission on the valve body.
It is the part that the torque converter goes into in the transmission.It is the part that the torque converter goes into in the transmission.
The Torque Converter uses the same fluid as the transmission. The transmission has a filter. So, in effect...the answer is "Yes" torque converter fluid is filtered. However, the torque converter has no special fluid of its own.
In the transmission
The torque converter is bolted between the engine and transmission.