0
What else can I help you with?
Do the intake bolts bolt in the top of the block or into the heads on a 305 vortec?
Into the heads only.
Will 302 intake fits 350 block?
If you are talking about a CHEVY small block 302 intake then yes. It will bolt right on any 350 under the year 1987 with out modifying it.
Will an 882 head with 1.94 intake valve fit 305 block?
YES, Direct bolt on.
Is a Chrysler intake manifold interchangeable with a Chevy big block?
No it is not completely different bolt pattern and dimensions
The right torque for a Chevy intake with aluminum heads?
I believe the torque is figured on the bolt size, not the material. you are using steel bolts ,therefore the torque for an intake bolt on a sm. block is 20 ft. lbs.
Can you swap a 5.2 magnum into your 89 Dodge truck and use the tbi intake from the 89 model truck?
The throttle body intake will not bolt to the Magnum engine block.
Is this a good block 5.7 LG SGI 14093638?
That is a 350 that was used from 1987 to 1995, It could be a 2 bolt or 4 bolt main and did not say for sure. It could also have a roller are flat tappet camshaft in it. It does have a 1 piece rear main seal. The only problem they had with them is the block cracking down in the lifter gallery. Those blocks were thin and weak in that area. Not a good block for high performance useage are high RPMs. Hope I helped.
Will pre-1990 heads fit on a vortec block?
Yes the heads will, But the problem is that the vortec intake won't bolt up to the pre- 90 heads. DIFFERENT BOLT PATTERN.
Will regular old style 305 heads work on a newer vortec 305 block?
The heads will fit the block, but the vortec intake manifold will not bolt to the old style heads.
Can you use a 1988 Chevy 350 heads on a 1992 block with the use of the 1992 intake?
Yes They will bolt right on with out changing anything
Does all Chevy small block heads interchange?
Yes and no. Any head will bolt to any block ( except for the very first ones with no oil filter) but the intake manifold bolt pattern changed twice. Once in 87 and again in the 90s when they brought in the vortec. As long as u have the right intake manifold u will be fine
Can a 1992 gmc 350 tbi intake manifold bolt up to a 1976 gmc 350 block or change the heads too?
It should bolt up without changing the heads.
