0
If your GE gas stove top burners won’t stay lit after releasing the knob, it may be due to a faulty igniter or a problem with the safety valve. The igniter needs to remain hot for a few seconds to keep the gas flowing; if it's not functioning properly, the gas will shut off. Additionally, ensure that the burner cap is properly aligned and that there are no obstructions in the burner ports. If the issue persists, it may require professional repair.
What else can I help you with?
How do you light the pilot light on a gas stove?
To light the pilot light on a gas stove, locate the pilot light assembly near the burners. Turn the gas knob to the "pilot" position and press it down. While holding the knob down, use a long lighter to ignite the pilot light. Keep the knob pressed for a few seconds to allow the pilot light to stay lit. Release the knob and adjust the flame as needed.
How do you light an O'Keefe and Merritt stove?
You should be able to turn the knob and it should light. If it doesn't and it's very old, and you can hear gas flowing, you need to light it with a match when you turn the knob. If it's newer, then the pilot is probably out. You can light it by pushing the red safety button (usually in the left side storage compartment if it's a one-oven stove or under the top of the stove if two ovens) and putting a match to the pilot at the back top of the broiler for the oven and under the middle of the griddle for the burners. You may have to hold the button in for several seconds before it will stay lit.
How do you light the pilot on a gas stove?
To light the pilot on a gas stove, locate the pilot light button or knob near the burner. Turn the knob to the pilot position and press it down while using a long lighter or match to ignite the pilot flame. Hold the knob down for a few seconds to allow the pilot to stay lit, then release it.
How do you light a pilot light on a gas stove?
To light a pilot light on a gas stove, locate the pilot light assembly near the burner. Turn the gas knob to the "pilot" position and press it down. While holding the knob down, use a long lighter to ignite the pilot light. Keep the knob pressed for about 30 seconds to allow the pilot light to stay lit. Release the knob and adjust the flame as needed.
How do you properly ignite the pilot light on a stove?
To properly ignite the pilot light on a stove, locate the pilot light assembly near the burner. Turn the gas knob to the "pilot" position and press it down. While holding the knob down, use a long lighter to ignite the pilot light. Keep the knob pressed for a few seconds to allow the pilot light to stay lit. Release the knob and adjust the flame as needed.
How do you light the pilot on a gas stove oven?
To light the pilot on a gas stove oven, locate the pilot light assembly near the burner. Turn the gas knob to the pilot position and press it down. Use a long lighter or match to ignite the pilot flame. Hold the knob down for a few seconds to allow the flame to stay lit. Release the knob and adjust the temperature as needed.
What is a good, cheap hotel to stay at?
A good nice place to stay that would be cheap and not run down is the Intown Suites. It is a very nice hotel and it is set up like a studio apartment. You have a full refrigerator, a stove with burners, sink, table and microwave.
Your oven burners light but not your oven?
yes I can get the pilot to stay lit
Why won't the pilot light stay lit on the gas stove?
The pilot light on a gas stove may not stay lit due to a dirty or damaged pilot light assembly, a faulty thermocouple, or a problem with the gas supply. It is important to have a professional inspect and repair the stove to ensure safe operation.
Why won't the burners stay lie on the pool heater?
If you mean "stay lit", you probably have a faulty thermocouple. This costs about $10 and a competent handyman or technician can fit it in less than an hour.
Why does my electric stove burner stay on high even when I try to adjust the temperature?
The electric stove burner may stay on high even when you try to adjust the temperature due to a faulty temperature control switch or a malfunctioning heating element. It is important to have a professional inspect and repair the stove to ensure safe and proper functioning.
What Clara Barton liked to do as a child?
like to play teaparty and like to stay by the stove
