Change front light bulbs
Blinkers, Reverses lights and Hazards are all wired into the same fuse. When a short occurs in one of the components all of the lights will cease to function. The fuse should be checked to see if they are in working condition.
there are 2 flasher cans in vehicle.one operates hazards and the other operates the blinkers. change the one that operates the blinkers and your blinkers will work
Check/change the fuse associated with the blinkers.
the hazard switch has two sets of contacts. when hazards turned on, blinkers cannot work,even if hazards dont work.for blinkers to work, hazard sw must be in off position-this reconnects blinker circuits to work normally. BUT-the contacts in the hazard sw get dirty and wont reconnect the blinkers to work
If both blinker and hazards dont work check your flasher switch.
Turn the hazards on and check for a burnt-out bulb.
chances are your flasher for the blinkers OS bad,the flasher for the hazzards are usually on different circits for emergency situations.
Replace the turn signal flasher relay.
One fuse controls the function of the hazard, reverse, and turn signals of the car. When there fuse blows all the components stop working.
Check the Fuse.
might have a short in the wiring to the light socket!! same happen to me...