The fly wheel is a large, heavy, but thin wheel fitted on the end of the crankshaft. It is primarily to give smoothness to the engine rotation, but also carries a ring gear on it's outer edge to engage the starter and a plate in the centre to connect to the flex plate of transmission.
There is no such thing as a Fly Wheel Belt, unless your refurring to the timing belt which is hooked to the crankshaft which the fly wheel bolts to... The Timing Belt is on the front of the engine.
In between the engine and transmission
It is between the engine and the transmission. You have to remove the transmission to replace it.
The transmission has to be removed. Once the trnsmission is removed the fly-wheel is right there to be removed.
yep under the fly wheel at top of engine
remove engine or transmission to get to rear oil seal . you have to remove fly wheel to r/r rear seal .pretty heavy dutyjob.
Without a flywheel you couldn't even start the engine.
You can either pull the transmission out are pull the engine out. Your choice 1 or the other.
drop the tranny and you should be able to do it from under the truck
Golithbeetle are heavy to fly
There is 2 of them in the back of the engine. You will have to pull the engine are remove the transmission and fly-wheel to get to them. It is what ever is the easiest for you.