A timer is often used in a heated rear window function to stop the circuit from over heating and blowing a fuse if forgotton about.
Because a central heating model does not have any electrons travelling through wires but have water. If a wire broke in a electric circuit , then if you're not going to turn off the circuit you would get electrecuted. In a central heating system, if it would break water will leak and nothing will hurt you or anything and you won't get electrecuted.
To help extract heat from the main processor unit as over heating can destroy the system.
Heat changes the resistance of a circuit. The change is detected by the system, and activates the alarm.
To allow for the expansion of heated thot water
To move air thru the HVAC (heating, ventilation and air conditioning) system.
A Rayburn is a type of stove range. They are found in kitchens and function as an oven for cooking food and a way to heat water to be used in the heating system of the house.
Hot water baseboard heating is called a Hydronic heating system.
Same as any fuse in an electrical system- to protect components in the electrical system from damage in an overload or short circuit.
An electric circuit is a system of several parts. The circuit cannot function without all of them therefore there is no 'main' part. Essential parts are; power source, conducting material, load.
passive solar-heating system, and active solar-heating system are two types of heating system.. =D By: Wilfred Castro.
This type of a heating system is known as central heating.
OR diagram is a drawing or plan of the digital logic OR function, it is not able to actually do anything only tell a person something about this logic functionOR circuit is the actual electronics implementing the digital logic OR function, it is actually able to carry out this logic function in a digital device or system