There is a problem with your airbag system. Some vehicles will blink to display a diagnostic trouble code. For example 10 flashes, pause and 3 flashes, will indicate the trouble code 13.
why does my airbag light blink off and on on my 92 mercury gran marquis ls
The computer has detected a fault in the airbag circuit.
airbag
There is a problem in the airbag control system. The system needs to be checked to insure proper operation in the event of a crash.
To reset the airbag light on a 1996 Toyota Camry, first, ensure that the vehicle's ignition is off. Then, locate the airbag diagnostic connector, which is typically found under the driver’s side dashboard. Use a jumper wire to connect the terminals in the connector, turn the ignition to the "ON" position without starting the engine, and wait for the airbag light to blink. Remove the jumper wire after the light has blinked, and then turn off the ignition. This should reset the airbag light.
The infl rest light is just your airbag safety system it should blink a few times when the ignition is turned to on and then it should go out!!
How to reset airbag light
The airbag light turns on when the airbag computer detects a malfunction and sets a code.
An airbag inflates in less then 0.04 seconds. 5 times faster then a blink (0.2 seconds). If you blink, you'll miss it :)
who reset airbag light kia soul
The only way to switch off the airbag light is to remove the airbag light or remove the airbag light fuse. The airbag light fuse will disable several other instrument panel warning lights.
The airbag light can be reset by connecting an ODBII reader. However the light is on because of a problem with the airbag system. The system needs to be checked to insure that the airbag works properly.