Want this question answered?
how do i fit an electric window on a rover25,without the glass slipping down?
press and hold the window button down pause one second after the window has stopped moving at the bottom of travel. then press and hold the window button in the up position pausing again after the window has stopped moving. then a message will come up stating window set. repeat for all windows and sunroof.
if manual, window regulator. if electric, check fuses, window switch, window motor, window regulator.
needs a new window motor and regulator
If the window is stuck in the down position on a Chevy Silverado, the door panel will have to come off to access the cable mechanism and fix the window. If the windows are electric, there will also be the wiring assembly for the window to remove.
The window regulator has failed. The new one from the dealer will come with a window motor also.
THAT MEANS THAT THE WINDOW IS NOT INITALIZED AND TO DO THAT YOU NEED HOLD THE WINDOW SWITCH ALL THE WAY UP AND HOLD IT THERE FOR A FEW SECONDS THEN PUT THE WINDOW DOWN AND HOLD THE SWITCH DOWN FOR A COUPLE SECONDS AND THEN IT SHOULD BE OK
you could possibly have some sort of shortage
You have to go to the most top middle window that was blocked by structures. Now, push the most left structure, and it will be the way for Geiger counter to get down to your Poptropica Lunar Colony Rover. Finally, you succeed to load Geiger Counters to the Rover.
you need to replace the window regulator in the door. some come with a motor some come without. ask your local parts dealer.
If it is a sash-window, the ropes which have a weight on one end, and the other end is attached to the window frame (on both sides) has snapped. Once the ropes have snapped, the weight of the window will cause it to fall down. If it is a sash-window, search the internet for repairing a 'sash-window' or contact a local builder/handyman.
Replace the window regulator, it may come with the motor.