The Chevy 2500 HD Duramax would stall out at 200 RPM because of mechanical failures. The mechanical failure will make it not operate at its optimum.?æ
a stall will not engage trans until a minimum rpm is reach depending on rpm range of the stall converter
because everyone elses 1993 ford tempos stall when they idle. learn to drive with one foot on the gas and one on the brake like I do in my '93 tempo. keep the RPM at 1000 and it won't stall out.
It's roughly 5500 rpm
According to the 2000 Ford F-150 SVT supplement , the 2000 Ford Lightning 5.4 litre supercharged V8 engine is rated at ( 360 horsepower at 4750 RPM and 440 lb-ft of torque at 3000 RPM )
Could use more info but, a plugged fuel filter could do that.
The 5.0 liter V8 in a 2000 Ford Explorer is factory rated at : 215 horsepower at 4200 RPM and 288 lb/ft torque at 3300 RPM
The highest safe RPM for a 5.8 liter Ford Bronco from 1993 is about 3,800. The engine will rev above that but it can cause damage.
I replaced the crank sensor and the cam pick up that is under the distributor cap and still the wrangler wants to stall or back fires and bucks at 1200 to 2000 RPM when accelerating
ANSWER: The 2000 Ford Mustang 3.8L split-port v6 engine has 190Hp at 5250 rpm and 225 Ft-lbs of torque at 3000 rpm.
The Ranger Station . com ( no spaces ) shows the 2000 and 2001 Ford Ranger 3. 0 L as 150 horsepower @ 4750 RPM and 190 ft/lbs torque @ 3650 RPM
i dont go above 5000 rpm for my 1999 ranger 3.0 v6 if that helps?