If you mean the car will not start or even turn over when you turn the key, that 'clicking' is the starter solenoid making contact like it's supposed to. But there is not enough power from battery to start engine, only enough to make contacts in solenoid. Bad battery, or loose or corroded battery cable terminals
The clicking noise you can hear is the starter solenoid clicking into place. If the starter motor does not turn the engine immediately, it is probably the best place to look. it sounds like the starter motor is faulty.
you'll hear a constant clicking noise with no motor rotation, or you'll hear nothing at all
h/lamp & tns relay clicking when car is off & car will not start
A loud fast clicking noise is usually indicative of a low battery or a loose cable.
click noise from glove box everything workin properly what is it
stater or silanoid
If the Chrysler is only making a clicking noise and will not start, check the starter. Also check the alternator, and the battery. The starter solenoid is more than likely the reason the car is clicking and not starting.
Is it a lifter ticking?
Check your battery.
I have the same car with the same clicking noise right after you start the engine. The noise stops shortly after starting. There was a recall from Chrysler for this problem. Contact your local dealer regarding this matter.
if you try to start the car and it does not start and you hold it in the turn on position do you hear a noise like gears running if so you need a new starter 135 at auto-zone is what i paid for mine but if you don't hear the noise it could be the solenoid
With this symptom, if you tried to jump start the car it would start. The answer was a corroded Black/Cable going to the Negative terminal of the Battery.