P - Parking R - Reverse N - Neutral D - Drive 2 - High Drive With Gear 2 L or 1 - Low Drive
The shifter. D is for drive which is forward and R is for reverse. N is for neutral. You have to have the breaks pressed down all the way in order to move out of park and into D or R.
D=Drive, R=reverse, N=Neutral, 3, 2, & 1, are the speeds, or gears,of the transmission. So if there is a problem it is with the transmission.
I'm not sure I understand the question... Are you asking the P = Park R = Reverse N = Neutral question?
you must stop the car to switch from/to drive, park, reverse. no, you don't have to switch from 1st, to 2nd, to 3rd. that's what's automatic no, you dont have to stop to change between all forward gears ie 1 st 2 nd 3 ed 4 th all that is done automatically, you dont even have to think about it. no need to stop when manually shifting gears(ie racing your automatic) if you like to choose when you automatic changes from 1st to 2nd to D to OD you can, usually you can up shift from 1st to 2nd to D to OD by just pushing the sifter to the next gear but not OD to D to 2nd to 1st because of detents in the shifter will catch the shifter, unless you press the button or pull back the column shifter and down shift. last gear(D)to netural(N) you usually can freely move back and forth. just dont try to push the button and go into R (for race) while your driving it will destroy you transmission and put you in the ditch or on comming trafic. dont go from D to 1 or you will probably red line your engine and blow it!!!
In vehicles with an automatic transmission, the letter D often denotes the driveposition, as opposed to N (for neutral), R (for reverse) or P (for park).
P Park R Reverse N Neutral D Drive 2 Second gear L Low gear
The 3.3L a n d 3.8L engines have timing chains. The 3.0L has a timing belt.
you need to replace the who gear it is cracked or chipped
The difference between automatic and stick shift is many. Automatic is normally any car that has the selecter in the interior going P N R D 1 2 and that basically selects the way your vehicle travels. In Standard or Manual, or Stick Shift its just where you are always selecting the gears going from 1- up depending on how many gears your car has and the reverse gear. Neutral or N is normally found in the middle of the shifting pattern. Also Standard has a clutch which you must use to disengage the engine from the transmission. That's the 3rd foot pedal.
you spell it like this A-N-D-I-R-O-N-D-A-C-K
Indicates gear positions of the automatic transmission; P=Park, R=Reverse, N=Neutral, D=Drive (transmission will automatically shift through all forward gears), 2=2nd gear (transmission will only shift from Low to 2nd gear), L=Low gear. Little known fact: In the auto business the indicator that displays this information is actually referred to as the "PRENDELO."