Szerencsejáték Zrt. was created in 1991.
no A FRN fuse is a slow blow fuse where an non is a fast blow fuse. In a pinch a slow blow fuse can be use in a fast blow circuit but not the other way around.
Blow My Fuse was created on 1988-09-19.
If the fuse is labelled F it is fast-blow or T OR S it is slow-blow, the letter should be on the metal cap on the ends of the fuse.
Any piece of machinery that is designed to use a fast blow fuse should only use a fast blow fuse. For safety reasons this could save your life instead of taking it.
The time it takes for a fuse to blow, either "fast blow" or "slow blow" is determined by the design of the fuse and is described in a table or graph provided by the manufacturer. In general, the higher the applied overload current, the faster the fuse will blow. Fast blow fuses can open in milliseconds, slow blow fuses can open in several seconds. The fuse used depends entirely on the application and what kind of circuit it is protecting.
What would cause your fuse to blow when you turn on your lights on your 1993 mazda 323 the fuse to the tail lights on dash lights blow?
Not sure, but i have a 97 600 zrt and that has 127 horse stock!
Determine what caused it to blow, fix the fault that caused it to blow, replace the fuse.Sometimes people replace the fuse first, but fuses rarely blow for no reason, and replacing the fuse without rectifying the fault can lead to additional damage.
A short to ground or an overloaded circuit will blow a fuse.
It depends on the precise type of slow blow fuse, but in general terms a fuse with a slow blow characteristic will take longer to operate (blow) at high overload currents than one with a normal characteristic. For low overload currents it will operate in about the same time as a normal fuse.
about 120