On my 87 Comanche, Interior of the Cab drivers side fuse box long silver circuit breaker at the bottom of the fuse box. By long I mean rectangular as opposed to round. It is a circuit breaker not a fuse that controls the Wipers.
It is a 10 amp fuse, upper right area in the fuse box under the dash.
On a 1989 Jeep Comanche pickup, the horn fuse is located in the fuse box under the dashboard on the driver's side. You can access it by removing the cover of the fuse box, which is typically found near the steering column. The specific fuse for the horn is usually labeled in the diagram on the fuse box cover. If the horn isn't working, check this fuse first to see if it needs replacing.
Answer flasher on 89 ComancheIf you are referring to the blinker "flasher fuse", it is the bottom round fuse under the dash in the fuse block.
The fuse and relay for the fuel pump are located in the engine. The pump itself is located in the gas tank.
In a 1988 Jeep Comanche, the fuse box is typically located under the dashboard on the driver's side. You may need to remove a cover to access it. The fuse box contains various fuses for different electrical systems, and a diagram on the cover or in the owner's manual can help identify which fuse corresponds to specific functions. Always ensure the vehicle is off before inspecting or replacing fuses.
underneath the steering wheel where the fuse box is.
It is under the dash, on the driver side.
If the brake lights and turn signals on your 1989 Jeep Comanche are not working while the headlights and tail lights function correctly, the issue could be due to a faulty combination switch, a blown fuse, or a problem with the wiring or connectors related to those specific circuits. It's also possible that the brake light switch, located near the brake pedal, is malfunctioning. Checking these components systematically should help identify the source of the problem.
get a bigger fuse or just branch a peice of wire were the fuse for the blinker goes
The fuse box on the 87 Wrangler is located on the driver side under the dash WAY UP top by the windshield
If your Jeep Comanche headlights won't turn on, it could be due to a blown fuse, a faulty headlight switch, or a problem with the wiring or connections. Start by checking the fuse box for any blown fuses related to the headlights. If the fuses are intact, inspect the headlight bulbs and wiring for any signs of damage or corrosion. If everything appears normal, it may be necessary to consult a mechanic for a more in-depth diagnosis.