On a 2010 Chevy Aveo LT, the radiator drain plug is typically located at the bottom of the radiator on the passenger side. It can usually be identified as a small plastic or metal valve. To drain the coolant, you may need to rotate or unscrew the plug counterclockwise. Always ensure the engine is cool before attempting to drain the radiator to avoid burns or injury.
It is located just beneath the lower radiator hose.
T40
19mm
The oil is wrong weight - oil plug is out - will not drain
19 mm
Backside of the oil pan.
Backside of the oil pan.
Backside of the oil pan.
There is none. Fluid must be pumped out.
the drain plug (which is plastic) is a couple of inches from the bottom of the radiator on the passenger side of the vehicle. You may have to buy a replacement plug beforehand in case it doesn't seal properly after reinstalling it. Do this when the car is cool and dont run cold water into a hot block. Also, don't leave it running after it drains (obviously!)
The radiator core on a 2007 Chevy Aveo is located at the front of the vehicle, behind the front grille and in front of the engine. It is part of the cooling system and is usually positioned just behind the bumper. To access the radiator core for maintenance or replacement, you may need to remove the grille and possibly other components that obstruct access.
The oil drain plug on a 2009 Chevy Aveo typically has a size of 13mm. It's essential to use the correct size socket or wrench to avoid stripping the plug. Always check for specifications in the owner's manual or consult a professional if unsure.