It's called the bottom radiator hose there is no drain per say.
Yes, the 2007 GMC Sierra does have a radiator drain. It is typically located at the bottom of the radiator and is used to drain coolant for maintenance or repairs. To access it, you may need to remove any splash shields or underbody components, and it's advisable to take precautions to avoid spills and ensure proper disposal of the coolant. Always refer to the owner's manual for specific instructions and safety guidelines.
The bottom inside corner of the radiator.
The drain plug on the radiator of a 2007 Dodge Caliber is typically located at the bottom of the radiator on the driver's side. It is a small plastic or metal valve that can be turned to allow coolant to drain from the radiator. Be sure to have a container ready to catch the coolant when you open the drain plug. Always allow the engine to cool before attempting to drain the radiator to avoid burns.
The drain plug for the radiator of a 2007 Dodge Caliber is typically located at the bottom of the radiator on the passenger side. It may be a small plastic or metal valve that can be turned or removed to allow coolant to drain. Always ensure the engine is cool before attempting to drain the radiator to avoid burns or injury.
I have a 2007 GMC Sierra 5.3L V8...and I just changed my oil and found the drain plug on the opposite side of where the Oil Filter is. The plug is a 13MM.
It seems these 2007-2013 GM lambar do not have drain plug.
There is no drain cock on the '07 G6 GT. The easiest way to drain is from the water pump connection at the bottom passenger side of the radiator.
The radiator drain petcock on a 2007 Chevy Malibu is typically located on the bottom of the radiator, on the driver's side. It is a small valve that allows for draining the coolant from the radiator. To access it, you may need to raise the vehicle and remove any splash shields if present. Always ensure the engine is cool before attempting to drain the coolant.
To flush the radiator in a 2007 Saturn Ion 3, first ensure the engine is cool and then locate the radiator drain plug at the bottom of the radiator. Place a container beneath the plug, open it, and allow the old coolant to drain completely. Next, close the drain plug and fill the radiator with a radiator flush solution, then run the engine for about 10-15 minutes with the heater on high. Finally, drain the flush solution, refill with fresh coolant, and check for leaks.
Remove the oil pan drain plug to drain the oil. Remove the lower radiator hose to drain the coolant.
On a 2007 Mitsubishi Outlander, the radiator drain plug is typically located at the bottom of the radiator, on the driver's side. It's a small plastic or brass plug that can be turned counterclockwise to drain the coolant. Be sure to use a container to catch the coolant when draining, and ensure the engine is cool before attempting this procedure.
To drain the radiator on a 2007 Buick LaCrosse, first ensure the engine is cool and then locate the radiator drain valve, usually at the bottom of the radiator. Place a drain pan underneath the radiator and open the valve to allow the coolant to flow out. After draining, close the valve and refill the radiator with the appropriate coolant mixture. Always dispose of the old coolant properly and check for leaks before starting the engine.