There isn't a pressure sensor - you're probably thinking of the fuel sending unit, which is mounted at the top of the tank. It'll read your fuel level, but not pressure - the tank isn't pressurized to begin with, and any fuel being returned to the tank would be on the low pressure circuit, as well.
It is attached to the top of the fuel pump module. It can be replaced without removing the fuel pump module from the tank. There are two electrical connectors attached to the top of the fuel pump module. One has 4 wires that operates the fuel pump and fuel gauge. The other has three wires that operates the EVAP system pressure sensor.
Where is located pressure sensor on Chevy Malibu 1999
It is behind the distributor at the firewall.
The tank pressure sensor is usually located on the top of the fuel pump assembly.
The oil pressure sensor on a 1988 Chevy 1500 5.7 is located on the engine. It is on the right side, near the intake manifold.
The fuel tank EVAP pressure sensor is located on top of the fuel tank along with the fuel pump assembly.
Need the engine size.
top of the fuel tank
The MAP (Manifold Absolute Pressure) Sensor on a 2000 Chevy Suburban is located on the very top of the motor. It is all the way to the back of the motor. There is nothing behind it.
Could be the temp sensor..there could also be an oil pressure sensor at the top, back,or the block.
the map sensor is located behind the alternator by the plenum, above the the pcv valve
This is the Manifold Absolute Pressure sensor. It is located on the top of the motor between the fire wall and the intake manifold case.
It's in the front of the engine above the oil filter