The regulator is part of the fuel pump assembly located in the fuel tank.
Fuel pump assembly is located inside the fuel tank. The access to it is under right rear seat.
The Fuel Tank Pressure Sensor on a Oldsmobile Bravada 2000 is on the top of the Fuel Pump Assembly.
The fuel filter is located in the gas tank as part of the fuel pump assembly. So change it whenever you have to replace the fuel pump.
The fuel pump is INSIDE the fuel tank. The tank must be removed from the car, drained, and the new pump assembly installed. This is a job for a qualified mechanic.
Located in the fuel tank- may have to be removed for access
The fuel pump is in the fuel tank.
remove fuel tank after draining. remove all lines hoses and wires from top of tank. remove fuel pump assembly by turning large plactic nut counterclockwise. disconnect wires inside pump assembly. slide senor and float from fuel pump assembly.
It is in the fuel tank. It is one assembly which includes the fuel level sender unit, fuel filter, fuel pump and the pressure check valve. If you are asking this, your Durango has about 110k miles on it
Most likely inside the fuel tank. You will have to drop the fuel tank and remove the retaining ring on top of the tank and the pump/gauge/filter assembly will come out.
First remove the fuel tank then remove the pump assembly locking ring then remove the pump assembly.
Fuel pump assembly is located inside the fuel tank.