The bank one sensor, on your Suzuki Grand Vitara XL7 4 x 4 is located on the front of the transmission. The sensor will have 3 wires coming from it.
P0135 O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1) Bank one is drivers side. Sensor 1 is the one closest to the engine.
The Bank 1 sensor is located right behind the heat shield on the driver side towards the firewall.
Bank 1 sensor 1 where is it located on the Suzuky swift 2005?
Bank 1 is cylinder 1 side of the motor. Sensor 2 is the back oxygen sensor (after the catalytic converter.
Bank one sensor one on a 2006 Ram is before the catalytic converter on the driver side.
On a 2006 Dodge Dakota bank 1 sensor 1 is driver side above the catalytic converter.
which sensor is for bank 1 sensor 1 on a 2006 nissan xterra
That is the sensor in the catalytic converter.
Bank 2 indicates the bank containing cylinder #2. Bank one contains cylinder #1. Passenger side cylinder #'s are 2,4,6. Driver's side's are 1,3,5. Make a diagram for yourself, it helps a lot for not forgetting. Ok. Now that you know where bank 2 is. The GV v6 has 4 O2 sensors, 2 on each pipe that comes directly out of each manifold on either side of engine. On each side, one sensor is above or 'upstream' of the little pre catalytic converter, one is below or 'downstream'. The upstream sensor is #1, the downstream sensor is #2. Therefore Bank 2 sensor 1 is the upstream or top sensor on the passenger side bank of cylinders. This concerns the O2 sensors, which I assume is what you are referring to.
bank 2 is the drivers side of the engine sensor 1 is before the exhaust enters the catalytic converter
There are 4 Total, 2 per bank. Sensor 1 is the Pre-catalytic converter sensor and sensor 2 is Post cat. (after). Bank 1 is the Driver's side and 2 is the Passenger side of the engine.