RHD it is on passenger side next to kick panel
To open the bonnet on a Peugeot Partner van, first, locate the bonnet release lever inside the vehicle, typically found near the driver's side footwell or under the dashboard. Pull the lever to release the catch, then move to the front of the van. Lift the bonnet slightly and locate the secondary catch, which is usually centered at the front of the bonnet; push or lift this catch to fully open the bonnet. Finally, secure the bonnet with the prop rod if equipped.
To release the bonnet on a Fiat Scudo van, locate the bonnet release lever inside the vehicle, usually found on the driver's side near the footwell. Pull the lever to disengage the bonnet latch. Then, move to the front of the van, where you can lift the bonnet slightly to find the secondary catch, usually located in the center. Push this catch to fully open the bonnet for access.
to the left under the steering wheel
on the floor beside passenger seat near door
To open the bonnet of a Luton van, first ensure the vehicle is parked on a flat surface and the engine is turned off. Locate the bonnet release lever, which is typically found inside the cab, near the driver's side. Pull the lever to release the catch, then go to the front of the van and lift the bonnet. If necessary, secure it with the prop rod to keep it open while you work.
right foot well, above right pedal.If the van is like the punto - if the level is slack, then the bonnet release cable has snapped.You'll have to jack the car up, and access / pull the cable from underneath.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath.I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9Read more:Where_is_the_bonnet_release_on_a_Fiat_Punto
just below the steering wheel, left hand side.
ere is the horn located on vito
In the Citroën Berlingo van, the bonnet release is typically located inside the vehicle, on the driver's side. Look for a lever or pull tab near the footwell or under the dashboard, often marked with a symbol of a car with an open bonnet. Once pulled, you may need to locate a secondary catch under the front of the bonnet to fully open it. Always refer to the owner's manual for specific details related to your model year.
The Mercedes E200 is a midsized car, the Vito is a van.
To open the bonnet on a Kangoo van, locate the bonnet release lever inside the vehicle, typically found near the driver's side footwell. Pull the lever to release the initial latch. Then, move to the front of the van, where you'll find a secondary safety latch under the centre of the bonnet; slide this latch to the side and lift the bonnet. Ensure to secure the bonnet with the prop rod if equipped.
happened on mine when the battery shorted out against the bonnet