There is no switch used to activate the back up lights on a 2000 Chevy Silverado. The light should turn on automatically when you put the car in reverse. If it does not, the bulb may be out, or the fuse has gone bad. Another possiblity is an issue with the wiring to the light. Replacing the bulb is the cheapest troubleshooting option.
It is in behind the dash right beside the head light switch. You will have to remove the plastic dash cover on the front of the dash to get to it.
no reset switch in this system
stop light switch is located above brake pedal under dash
Either auto , or 5Spd. , switch is mounted on transmission.
how do you replace ambient light sensor on 2002 silverado
The brake light switch is located under the dash. It is connected to the upper arm on the Brake pedal
No, it does not.
There is NOT one.
The Back up light switch (reverse light switch) is located on the top of the transmission. If you remove the air cleaner element, look down, a little to the left you will be able to see it.
The relays are integrated into the switch itself.
The brake light switch is located on the brake pedal bracket. You'll need to remove the trim panel beneath the steering column to get to the switch and the connector. FriPilot
A Silverado C1500 is a 2WD light truck, K1500 is a 4WD light truck. Please clarify what you mean about the r and the v as I am unfamiliar with that coding.