AtoZ manuals
value of kubota l2900 tractor with backhoe
The Kubota L2900 with the serial number L2900E11889 was manufactured in 1997. Kubota typically uses a serial number system where the first few digits indicate the model and year of production. In this case, the "E" in the serial number indicates it is an early model from that production year.
The Kubota L2900 typically uses a hydraulic fluid that meets the specifications of ISO 46 or equivalent. It's essential to use a high-quality hydraulic oil that conforms to the manufacturer's recommendations to ensure optimal performance and longevity of the hydraulic system. Always check the owner's manual for specific fluid requirements and maintenance guidelines.
The Kubota L2900 was produced from 1998 to 2003. Given that the serial number 10893 falls within the range of production for that model, it is likely to be from the early years of that range, probably around 1998 or 1999. For a precise year, you would typically need to consult Kubota's specific serial number decoding resources or contact a Kubota dealer.
To service the hydraulic system on a Kubota L2900, start by checking the hydraulic fluid level using the dipstick; add fluid if necessary, ensuring you use the recommended hydraulic oil. Next, inspect hydraulic hoses and connections for any leaks or damage, and replace any faulty components. It's also important to change the hydraulic filter according to the maintenance schedule, and to bleed the system if air has entered. Finally, check for proper operation of the hydraulic functions after servicing.
To check the front differential of a Kubota L2900, first ensure the tractor is on a level surface and safely secured. Locate the front differential fill plug, typically positioned on the differential housing, and remove it to inspect the fluid level; the oil should be just below the fill hole. If necessary, use a dipstick or a finger to check for fluid condition, looking for signs of contamination or metal shavings. Refill with the appropriate differential oil if the level is low or if the fluid appears degraded.
On a Kubota L2900, the fuses are typically located in a fuse box situated under the dashboard or near the operator's seat. To access the fuse box, you may need to remove a cover or panel. It's advisable to consult the owner's manual for the exact location and identification of the fuses to ensure proper handling and replacement.
The hydraulic tank on the Kubota L2900 is located under the operator's platform, near the rear of the tractor. It is typically integrated into the chassis design, making it somewhat hidden from direct view. To access it for maintenance or checking fluid levels, you may need to remove the floor panel. Always refer to the owner's manual for specific instructions related to your model.
Take the soft cover off, the drive shaft out and put the seal back in. Then install the fix kit from kubota. Its a common problem.
To check the hydraulic fluid level on a 1998 Kubota L2900, first ensure the tractor is on a level surface and the engine is off. Locate the hydraulic fluid reservoir, typically found near the rear of the tractor, and remove the filler cap or dipstick. Wipe the dipstick clean, reinsert it without screwing it in, and then remove it again to check the fluid level against the marked indicators. If the level is low, add the appropriate hydraulic fluid until it reaches the recommended level.
Ashland makes the oil to Kubota spec