When the engine revvs up to about the 5 on the RPM gauge in fifth gear.
There are some automatic gear buttons. You can change them by pushing or pulling the handle of the gear forward or backward next to the correct button.
yes you have to change gear in any vehical that is a stick. you can change it to 1st gear or neutral. but on the other hand with a automatic their is no need to change gear they put a auto clutch system in vehicals like that.
You can change the differential gear ratio but you will sacrifice quickness on the lower end unless you have sufficient horsepower.
The vehicle manual usually says what speeds to do in which gears.
gear 3 That would be the drive gear, the gear that gear drives would be the driven gear.
You need to shift the stick shift like your going to put it in sixth gear but you have to push down on the stick shift as your putting it into sixth gear.
about 80+ sixth gear full throttle
the purpose of a quick change gear box (as the name suggests) is to allow you to change gear quickly.
you can change the c-gear by looking on the top of the screen it it says 'c-gear' tap it
How do you change gear oil in a 1998 expedition?"
I think with a car or a motorbike you shouldn't change gear while you are turning. Change gear before you get to the corner or change when you come out of the corner
To change the gear knob on a golf MK2 too need the tool box that will help you open and get access to the area that has the gear knob. You can then change the gear knob from this point.
You have to change the gears
you would need to change the differential gears to change the gear drive.
if i change the screen on transmission will help it? sometime it slow going into gear.
It's either a fouled spark plug or your drive chain is stretched past its adjustment point.
Yes you can.