Neither! Both are extreme necessities and should not be driven without. These are safety measures to insure the best experience within the safety precautions.
But if you MUST, then I'd say the auto locks because as soon as you get in the car you can lock it. On the other hand if your car is hit or being hijacked then the warning lights (or alarm in general) will come to great use.
Hope that settles it, even though turning off either is pretty hazardous...
To check the lights on your vehicle's dashboard, start the ignition without starting the engine to power the electrical system. Observe the dashboard; all warning lights should briefly illuminate and then turn off as the vehicle starts. If any lights remain on after the engine starts, consult your owner's manual to determine the specific warning and take appropriate action. Regularly checking these lights helps ensure your vehicle is in good working condition.
(???) The warning lights are located in/on the dashboard surface and should light up for a few seconds as a system check, when you start the vehicle.
A Ford transit light can have different meanings. If this light appears you should take the vehicle to a mechanic as soon as possible to find out the issue.
This is the Bulb Warning Light; Meaning the vehicle has a faulty bulb, on the exterior or of the vehicle. Check all of the lights (with ignition on); Front + Rear side lights Front Headlights Front high beam Front +Rear Fog Lights Front + Rear Indicators Rear Stop lights (including high level/ centre stop) Number plate lights And, Reverse lights. Replace the necessary bulbs, recheck all lights, and the light should disappear.
There are many different ones on the dash. They are colour coded as follows: Green: Informative. ie. signal lights, trailer light. Yellow: soft warning lights. The vehicle can still be driven, but there is something that you should be informed of or possibly have checked. ie. service light. diff lock light. Red: serious warning lights. The vehicle should be shut down and parked. Have the matter attended to immediately to avoid damage or incidents. Have it checked by a professional. ie. low coolant, low brake fluid. Blue: Reserved for your high beams. This means your high beam lights are on. Turn them off for approaching vehicles. For specific warning lights, refer to your Owners' Manual, or post a description.
To reset the warning lights on a 2005 Jeep Grand Cherokee, start by turning the ignition key to the "On" position without starting the engine. Then, press the gas pedal three times within ten seconds. After that, turn the ignition off and then restart the engine; the warning lights should be reset. If the lights remain on, it may indicate an underlying issue that needs to be addressed.
The owners manual and/or a repair manual for your car should list the meanings of the warning lights.
The immobilizer warning indicator light is a warning signal on a vehicle's dashboard that alerts the driver to issues with the vehicle's immobilizer system. This system is designed to prevent the engine from starting unless the correct key or key fob is used, enhancing vehicle security. If the light is illuminated, it may indicate a malfunction in the system or that the vehicle isn't recognizing the key, potentially preventing the engine from starting. Drivers should consult their vehicle's manual or a professional if the light remains on.
If your vehicle becomes disabled on the freeway and you can't pull completely out of the traffic lane, you should turn on your hazard warning lights immediately to alert other drivers. Stay inside your vehicle with your seatbelt fastened, especially if it's safe to do so. If it's necessary to exit the vehicle, do so from the side away from traffic and move to a safe location. Call for assistance as soon as possible.
If you are driving with your bright lights on and can see an approaching vehicle, you should turn off your bright lights immediately.
You should check for th obvious signs that there is a problem. You should look for any puddles of fluids or oil under the vehicle,and any warning lights on the dashboard.
The lamp out warning light on a 2004 Dodge pickup truck indicates that one or more exterior lights, such as headlights, taillights, or turn signals, may be malfunctioning or burned out. When this light illuminates on the dashboard, it's advisable to check all the vehicle's lights to ensure they are functioning properly. If a bulb is found to be burnt out, it should be replaced to clear the warning light. Regularly checking your vehicle's lighting system helps maintain safety on the road.