0
What else can I help you with?
If another vehicle is passing you do you maintain your speed?
There are a couple scenarios in this situation when a vehicle passes you on the left on a 2 lane highway. To answer your question, you should maintain your speed, but you can also slow down a little bit to get the passing vehicles past you faster. If there's a danger of a head-on collision with an oncoming vehicle and the vehicle passing you, you need to pay attention to what the passing vehicle does, only one of two scenarios will occur: If the passing vehicle decides to speed up to get past you to, you need to slow down! If the passing vehicle slows down to drop back behind you, you need to speed up! Whatever the passing vehicle decides to do in that scenario you do the opposite. The idea is to get the vehicle back into the right lane as quickly as possible!
Is light bouncing off a mirror reflected or refracted?
Light bouncing off a mirror is reflected. Reflection is when the light bounces off a shiny surface back to your eye while refraction is when the light changes direction when passing from one medium to another medium of different optical density.
What is principal axis of a mirror?
The principal axis of a mirror is an imaginary line that passes through the center of curvature and the vertex of the mirror. Light rays parallel to the principal axis either converge or diverge after reflecting off the mirror.
When a light ray passes fro water to air?
it will to refract/bend because its passing from one medium to another
What are three ways light behaves?
Light can be reflected, refracted, or absorbed. Reflection occurs when light bounces off a surface, like a mirror. Refraction is when light changes direction as it passes from one medium to another, like when light passes through a prism. Absorption happens when light is taken in by a material rather than passing through it.
Is passing slang word for died?
Yes. When someone "passes" or "passes on," it means that they die.
What happens when a light ray passes through a focal point and then passes through a covex mirror?
When a light ray passes through a focal point of a convex mirror, it will reflect parallel to the principal axis. This is because the reflected ray follows the law of reflection, where the incident angle is equal to the reflection angle.
What is the Focal length of a concave mirror?
It is the point , on the central axis, where light, that is parallel to the central axis, passes thru after it is reflected from the mirror. It is also at a distance from the mirror equal to twice the radius of curvature of the mirror.
What types of collisions can result from making unsafe passes in a vehicle?
On a two-lane road, unsafe passing of a vehicle can cause head-on collisions. It can also cause fender and hood damage as the passing car attempts to get back into it's lane. If one vehicle clips the other, one or both cars could spin, flip, or roll depending on the road conditions, size and weight of vehicles, driver experience, and speed of both vehicles.After the passing vehicle causes the accident, it can then cause a pile up if approaching drivers can't slow down quickly enough or aren't paying attention. If cars safely pass by the accident, there will always be drivers who gawk so someone un-involved in accident #1 will cause accident #2, usually a rear-end collision. One rear-end collision can and often does cause another, and another.Moral: Do not pass go, do not collect $200, when it is not safe to pass another vehicle.
Where should you look if blinded by another car's headlights?
I try to focus on the white line on the right side of the road until the oncoming vehicle passes by.
If an emergency vehicle passes you in traffic just as it passes you the pitch of the siren changes. This is because?
frequency.
What type of image does a Convex mirror produce and Why?
A convex mirror produces a virtual image, because the principle light rays incident on the mirror surface from the object must pass through the focal point on the other side of the mirror (virtually), and so the image appears at a depth behind the mirror's surface. The three principle rays that form the focused image are: 1. The ray from the top of the object, parallel to the line passing through the center of the convex mirror, must pass through the focal point behind the mirror's surface. 2. The ray that passes from the top of the object and through the focal point in front of the mirror, comes through the mirror (virtually) parallel to the center line. 3. The ray that passes from the top of the object to the point where the surface of the mirror and the center line intersect, the reflection of which is traced back through the mirror's surface at the same angle as the reflected angle. The place behind the mirror where these rays intersect is the placement of the virtual image.
