Where is the leak at? Is it under or near the engine? If so it may be the fuel filter. It may need tightening or need a new seal. If it is at the gas tank there are sealant kits where you mix two types of paste together and put it over the hole. Depending on where you live (near salt water) and the age of the truck it could be that your tank is rusted out and finding a good used one is the best bet. In between the tank and the engine is a fuel line that runs along the frame and sometimes there is a fuel filter there somewhere. Check it and any rubber hoses or loose hose clamps. Without knowing where it is though its hard to tell how to fix it.
Stasis Leak was created on 1988-09-27.
Well you might have a dirty fuel injector, low fuel pressure, or an air leak somewhere in you're intake manifold.
Have it pressure tested and repair the leak.
Because a seal has failed.
whats the answer?
It is located on top or around the gas tank.
The easiest way to fix a 1988 Ford Bronco gas hose leak is to replace the hose. You can also patch the week in the hose.
Most likely it means your gas cap is loose... or whats called an evap system leak.
could be a vacuum leak
vacum leak !!!!!!!!!!!!!!!!!!!
it has a low idle. Can also be a vacuum hose leak.
trying rack down a leak