It could be your MAF sensor. Mass air flow sensor that measures the air going into the intake. This could likely cause sluggish acceleration.
if you press the pedal to much that is what can cause the engine to flood
If there is no acceleration when pressing the gas pedal in drive, it could be due to several factors, such as a malfunctioning throttle body, a failed transmission, or a lack of fuel delivery from a clogged fuel filter or faulty fuel pump. Additionally, issues with the vehicle's electronic control unit (ECU) or a problem with the accelerator pedal position sensor could also prevent acceleration. It's important to diagnose the issue to ensure safe operation of the vehicle.
Letting go of the pedal or pushing the gas pedal.
The pedal needs to be greased with good ole WD-40 where the pedal goes into the firewall.
Any number of things. Take the car and have it checked by a Tune-up shop.
If the pedal is stuck down, no vacuum to the release diaphragm on the pedal
Pushing on the brake pedal
out of brake fluid?
The acceleration required for the train to cover a distance of 200m in 10 sec when starting from rest would be 4 m/s^2. This can be calculated using the formula: (a = 2d/t^2), where a is acceleration, d is distance, and t is time.
brake switch located on the top of the brake pedal
Check the switch adjustment on the brake pedal arm.
There are several things that can cause your 1989 Honda Accord to stall on acceleration. The most common cause is a plugged or dirty air filter.