The 3L30 automatic transmission, which is often associated with Suzuki vehicles, can be compatible with the 1989 Suzuki Sidekick 4x4 if sourced from the years 1989 to 1998. It's important to ensure that the specific models and engine configurations match, as there may be variations in the transmission types used across different years. Always confirm compatibility with transmission mount points and linkage before installation.
G44, 1989-98, 3 Speed 3L30 Tracker w/TC Here is what I found at Driveline.com about the G44 Hope This Helps.
If it came out of a 2WD vehicle, yes. If it came out a 4WD drive vehicle, you'll have problems. On the 2WD transmission, the driveshaft goes directly from the transmission to the rear axle. On the 4WD transmission, the output shaft from the transmission goes into a transfer case.
no obviously not. its 2 different years
Yes, the Honda Fit does have a transmission filter, which is part of the automatic transmission system. This filter helps to keep the transmission fluid clean by trapping contaminants and debris. Regular maintenance, including changing the transmission fluid and filter, is important to ensure optimal performance and longevity of the vehicle's transmission. Always refer to the owner's manual for specific maintenance recommendations for your model year.
It mostly depends upon the motor that is in your vehicle and the motor in the vehicle in which you are removing the transmission from. It should work as long as they are removed from the same motors. The transmission on a 4cyl will not bolt to a 6cyl. www.FordRanger.net
literature as a vehicle for cultural transmission
A 3.3 transmission can fit a 3.8 engine, but compatibility often depends on the specific vehicle make and model. The bolt patterns and mountings may align, but other factors such as the transmission control system, drive ratios, and overall design must also be considered. It's best to consult a professional mechanic or refer to the vehicle's service manual for precise compatibility and installation guidance.
i have a long tail shaft turbo 350 in mine, you have to modify the mount is all, it will fit
Any year 4L60E (automatic) or NV3500 (manual) transmissions will. If you have a 2WD Blazer, then it needs to be a transmission out of a 2WD vehicle, and if it's a 4WD, then you need a 4WD transmission.
Installing speed gears in a standard transmission involves several steps. First, the transmission must be removed from the vehicle to access its internal components. Then, the transmission case is disassembled to replace the existing gears with the new speed gears, ensuring proper alignment and fit. Finally, the transmission is reassembled and reinstalled in the vehicle, followed by testing to ensure that the new gears function correctly.
97 transmission will not fit in a 2000 Chevy