Want this question answered?
Be notified when an answer is posted
The size of the orifice hole for a natural gas heater typically ranges from 0.014 to 0.036 inches, depending on the specific model of the heater. It's important to refer to the manufacturer's instructions or consult a professional for the correct specifications for your heater.
Typically, use 5 * the volume in cubic feet to get BTU/hour for natural gas heaters. For this shop, that works out to 180,000 BTU/hr. Lower ceilings would make a big difference here...
Converting a natural gas space heater to propane involves replacing the gas orifices, adjusting the air-to-fuel ratio, and installing a regulator designed for propane. It is important to follow the manufacturer's guidelines and have a professional technician perform the conversion to ensure proper and safe operation of the heater.
The size of a space heater depends on the size of a living room or bedroom. The best size for a space heater is 150 sq. ft for living rooms and bedrooms.
The size of a natural gas orifice is typically measured in inches and can vary depending on the specific application and type of equipment. Common sizes range from 0.012 to 0.125 inches. It is important to use the correct orifice size to ensure proper gas flow and combustion.
About 100 square feet is the averge room size for a heater to be used.
what size water heater for 3000 sq ft 4 bathroom house
Converting a natural gas heater to propane gas usually involves changing the orifice size and adjusting the gas pressure. It's important to consult the manufacturer's instructions or hire a professional to ensure the conversion is done safely and properly. Using the wrong type of gas can be dangerous and damage the heater.
The size of the breaker needed for a 220V wall heater depends on the current rating of the heater. Generally, for a 220V heater, a 20-amp breaker is common. However, it's important to check the manufacturer's specifications and local electrical codes for the appropriate breaker size.
Depends on the vehicle and somtimes engine size. B Clear.
take it to a shop and have them do it If it's the same as a pickup, take out the glove box and the resistor should be on top of the heater box. Not much too it.
form_title=Water Heater Repair form_header=12213 Choose any description for the problem*= [] No hot water [] Not enough hot water [] Pilot light is out [] Leaking tank [] Hot water fluctuations [] Leaking or cracked pipe [] Making noise [] Want to move to other location [] Want to replace with different type [] Other Do you know the size of your water heater you have now?*= () 30 Gallons () 40 Gallons () 50 Gallons () No water heater () Other "If a replacement is required, would you like the same type?"*= () "Yes () No, I want a different size () No, I want a tankless water heater () No, I want a solar water heater () No, I want to change to electricity () No, I want to change to natural gas () No, I want to change to propane gas () Don't Know" What is the source of heat the water heater is using?*= () Electricity () Natural gas () Propane () Don't Know