The Cub Cadet 2130 typically uses a 1/2-inch by 94-inch drive belt. However, it's always best to consult the owner's manual or check with a local dealer to confirm the exact part number and specifications for your specific model, as variations can exist.
partstree.com they have every diagram for cub cudet 1440 riding mower
Cub cudet
A-sect V belt 1/2 by 78 part # 954-0461
2 quarts of SAE 10 W 30
how do you change drive belt on a ltx 1040 cub cadet
No the drive belt and Deck belt are two different belts, one powers the rear wheels, the other powers the deck. though if you are asking if they are the same belt as in same size, I don't know, you'll have to check your owners manual or talk to someone who repairs or can get parts for Cub Cadet mowers.
No but there is a Hockey belt loop.
The 1862 Cub typically uses a 1/2 inch wide belt, with a length of around 84 inches. However, it's always a good idea to measure the existing belt or consult the owner’s manual for the most accurate sizing. If you're replacing an old belt, ensure to check the specific model, as variations may exist.
You can replace the transmission belt, on a Cub Cadet 1042, by loosening the tensioner pulley. Once the tensioner pulley is loose the belt will easily come off.
The drive belt on a Cub Cadet LX1040 is adjusted by turning a small bolt on the side of the cutting deck. It loosens or tightens the belt depending on the direction it is turned.
deck belt replacment for a 1998 cubcadet 1525
You can replace the drive belt on cub cadet RZT 50 by first making sure that the engine of the vehicle is turned off. Then you can pop open the hood and remove the belt.