12000btu hr
1 tile = 1.77 of a square foot, 240 Sq.Ft. divided by 1.77 = 135.5 tiles ok
Each tile is 12 inch x 12 inch = 1 foot x 1 foot = 1 square foot. To cover 240 square feet you would need 240 tiles
To calculate the square footage of a 30x8 foot trailer, multiply the length by the width. So, 30 feet multiplied by 8 feet equals 240 square feet. Therefore, the square footage of the trailer is 240 square feet.
A 12x12 inch paver is one square foot. So you would need 240 square feet.
The area of 12 foot times 20 foot are 240 square feet.
24 feet x 10 feet = 240 square feet.
Linear feet measure length, square feet measure area. Comparison is therefore meaningless.
usually 20 btu's per square foot so......12000 btu's should do fine
A 2x12x12 foot board would not be measured in square feet but cubic feet and there would be 240 feet3
If the size is 30 inches x 8 inches then the area = 30 x 8 = 240 square inches. If the size was in feet, multiply 240 by 144.
6x3 would require 2 pavers by 4 pavers to make a square foot which is 8 pavers per square foot. 240 pavers. That's only a 5 foot by 6 foot square.
In Korean shoe sizing, a size 7 typically corresponds to a size 240. This is based on the measurement of the foot in millimeters, where size 240 means the foot is 240 mm long. It's important to note that shoe sizes can vary between brands, so it's always a good idea to check specific sizing charts when purchasing.