what is suction pressure of r407a
The refrigerant pressure on an ice machine using R-404A refrigerant should typically be around 175-250 psi on the low side and 250-350 psi on the high side, depending on factors such as ambient temperature and load conditions. It's important to consult the manufacturer's specifications and guidelines for the specific ice machine model to ensure proper operation.
42
The boiling temperature of refrigerant R-404A at atmospheric pressure is approximately -46.5 degrees Celsius (-51.7 degrees Fahrenheit). However, this temperature can vary slightly depending on the specific pressure conditions in the system. R-404A is commonly used in refrigeration applications, particularly for low and medium-temperature systems.
if room tem is 70f 15psi
if room tem is 70f 15psi
The recommended high pressure for 404A refrigerant in a walk-in cooler is around 250-300 psi, while the low pressure should be around 50-65 psi. These values may vary depending on factors such as the ambient temperature and the specific system design. It's important to consult the equipment manufacturer's guidelines for precise pressure recommendations.
For R-404A refrigerant in an ice maker, the typical high side pressure should range from about 200 to 250 psi, while the low side pressure generally falls between 30 to 40 psi, depending on the ambient conditions and specific system design. It's important to consult the manufacturer's specifications for precise values, as they can vary based on the unit's configuration and operating conditions. Always ensure proper refrigerant management and monitoring for optimal performance.
18-20psig suction 250-270 psig discharge In freezers pressures are ok .I got it ,but the mention pressure of suction 18-20 discharge 250-270 at what temprature in centegrade it should be.
No, refrigerants cannot be blended.
The high side pressure for R-404A in an ice machine is typically around 250-300 psi, while the low side pressure is usually around 40-50 psi. These values can vary depending on factors such as the ambient temperature and the ice machine's operating conditions.
frezer not frezing hi side 250 psi low side 45 psi