Yellow/amber light is a cautionary indicator that the signal is about to turn red. If you are too close to the light to safely stop at this point, you should proceed through. If you're able to stop in a safe manner, you should anticipate the light turning red, and stop.
One if by land and two if by sea is the signal you shall set for me! The signal's yellow light was more green than red, officer! Semaphore utilizes signal flags.
A flashing yellow signal light means proceed with caution.
because yellow is awesome
When you see a yellow signal light, you should slow down and prepare to stop if it is safe to do so.
A yellow arrow signal at a traffic intersection means that the signal is about to change from green to red, and you should prepare to stop if you are able to do so safely.
A flashing yellow arrow signal means you can turn left, but you must yield to oncoming traffic and pedestrians.
The signal wire should be Tan. You should have a Yellow, Black, and Tan Wire. The Yellow being you MAF Sensor Signal. The Black being a Low reference voltage. Then your Tan your IAT sensor signal.
No passing to the left shall be done when there is a solid yellow line on the driver's side of the road.
yes,as they get older they shall turn a bit yellow
yellow
V for voila
yellow x