What part of the engine? The block can be made out of aluminum and it would be strong enough for even the highest of HP engines, as long as it is designed correctly. Connecting rods can be made out of aluminum, steel, or titanium. Carbon fiber can be used but generally high cost prohibits the uses of it. Aluminum connecting rods will fatigue after time and will need to be replaced. Steel or titanium are prefered for most motors. Pistons are aluminum. JE pistons make good forged as well as billet racing pistons. The crank is usually made out of a good grade steel such as 4140 steel. I hope this helps
Materials with high coercivity and high retentivity.
You can purchase materials at a warehouse or local materials store that carry the materials that you need to build your new wooden deck. If you are looking for high quality wood, I would recommend going to a store that specializes in selling high-end quality woods. Perhaps a lumber or wood store would be best for this type of situation.
you can build your own race car
Yes, provided it isn't geared too high.
yes you build up whats called a tolerance. it takes more of a drug to get the desired high.
It depends on how high the room is and also the materials used for the walls, floor and ceiling.
cam in an ic engine is made up of HIESPEED STEEL OR THAT CONTAIN HIGH %OF CARBON THAT CONTAIN .2% CARBON
To find out how well a vanity will handle high humidity, you'll have to find out if it has been treated to do so. To find this out, ask the sales person if the materials have been treated to withstand a high level of humidity.
they are materials that have a high tendency to do absolutely nothing .
Today, costs of building materials are high and to make a nice new stadium that'll last a while, it cost tons of money.
High Energy Materials Research Laboratory was created in 1960.
Discuss why materials with moisture content have high k-values