This is a licensed weight on a commercial truck. It is based on the rated capacity of tires and axles.Every one will be different.
Ah, the 1999 Freightliner, a sturdy and reliable vehicle. The gross weight of a Freightliner can vary depending on the model and configuration, but typically ranges from 33,000 to 80,000 pounds. It's important to check the specific specifications of the Freightliner you are referring to for the most accurate information.
Intake valve sensors.128 385 03
It all depends on what kind of freightliner truck you are looking for. There are small freightliner trucks and there are large freightliner trucks available for one to purchase.
Need to know the exact model and configuration in order to answer this. A 26k GVW box truck and a 33K dump truck aren't going to have the same tare weight.
The empty weight of a 26 foot Penske rental moving truck is about 9,000 to 12,500 pounds. It depends on the make of the truck. The International and Freightliner trucks of this type are about 12,400 pounds at empty weight.
It will vary depending on the truck configuration. My 2009 Freightliner Columbia with 70" condo sleeper, Detroit 60 engine, dual drive axles, and an empty 53' dry van trailer weighs about 33,000 lbs. The trailer is about 10,000 lbs of that weight. The same type truck with no sleeper and a single drive axle would weight quite a bit less but I'm not familiar with the actual weight.
The best way to get information on how to buy a freightliner truck, would be to look on international's website. They sell a lot of freightliner trucks.
Which Freightliner? Freightliner manufactures of markets Class 3 through Class 8 vehicles.
A 4x2 tractor with a GVWR of 33,000 lbs. would be. Most CL120s are 6x4 tractors, which would have a GVWR of ~54,000 lbs., making them a Class 8 truck.
No.
IIRC, the door panel on a Columbia is all snapped in (as pretty much the entire interior of a typical Freightliner fleet truck after the FLD120 is)... you just need a door trim puller to go around the panel, and pull it out, or even a simple slotted screwdriver should work.