Depends on the type of spark plug purchased, some are pre-set and not to be adjusted and some are .040 or .044. More info needed.
The OBD plug is under the dash on the driver side.
The spark plug gap for your Mercedes is .032
The spark plug gap on a 2001 Mercedes S600 should measure .044 inches. A new spark plug will come with the gap already set and should not need to be adjusted any further.
the spark plug gap size on a Mercedes e420 is .32
The spark plugs on a 1998 Mercedes Benz E320 are changed by removing the cover plate, disconnecting the plug wires, and unscrewing the spark plugs using a deep wall socket. New plugs are then put in place and torque down to specifications.
You will first need to remove the coils and plug wires to access the spark plugs. The coils sit on top of the valve cover and are held in with small torx head screws. Then pry off the plug wires and remove the coil and wires together. Then you have access to the spark plugs.
Changing the spark plug wires in your 1999 Mercedes-Benz is quite simple. The spark plug wires simply lift off. The new spark plug wires can be pushed onto the spark plug. It is best to change one wire at a time.
The 2001 Toyota Sienna spark plug gap is .023. Most spark plugs will be pre-gapped by the manufacture of the spark plug.
how do i locate the coil pack on a 1998 Mercedes c200
Give the spark plug boot a twist to free it from the spark plug then pull it off of the spark plug by the boot.