0
Add your answer:
Earn +20 pts
What is the difference between breakaway torque and rotational torque?
Breakaway torque is the torque required to start the initial movement, in the loosening direction, of a bolt, screw, or nut from its (non−loaded) at rest position with the locking element engaged. Tightening torque is the torque necessary to move the bolt, screw, or nut along its threaded length in the tightening direction.
What is Allen screwdriver?
Allen screw drivers are similar to Allen keys. This tool is using for tightening or unfascinating hexagonal socket head screws.
What are the torque specs for the heads on a 92 Honda accord 2.2 lx?
Be very careful when removing or tightening the head screws. There is a certain order and method for loosing and tightening the screws in order to avoid warping the head. When loosening them, you only turn each screw 1/4 of a turn at a time. Likewise, when tightening them, you will tighten each screw three times. However, you should do them in the recommended order. You should purchase a Chilton's repair manual. It does a good job of walking you through the entire process.
What is torque socket?
Answer A torque wrench has a gage which indicates the amount of twisting pressure (torque) applied as the fastener is tightened. This ensures the proper amount of torque and consistency and is meant to prevent over- or under-tightening of the fastener great answer! often used on car tires
What is an Edison screw socket?
The screw socket into which an ordinary light bulb is inserted.
In a Porcelain socket what color is the hot screw?
The hot screw on a Porcelain socket or and electrical is the Gold screw. The Silver screw is the neutral
How do you remove the rear speakers from a 1995 Dodge Neon?
Remove the back seat with a number 55T torque screw socket and then you can slide out the back panel to get to the speakers.
What are the uses of screw drivers?
For tightening and loosening screws.
What is an Allen screw?
An Allen screw is a screw whose head has a hexagonal socket.
Is screw force the same as screw torque?
No, screw force and screw torque are not the same. Screw force refers to the axial force applied along the axis of the screw, while screw torque refers to the rotational force needed to tighten or loosen the screw. Torque is calculated by multiplying the force applied and the distance from the axis of rotation.
What is the function of Screw Driver Set?
Tightening or loosening screws.
What does surub mean?
In romanian, "surub" [Shurub] means "screw". Not to "screw somebody", but like in "tightening the screws"
