There are many different springs used in automobiles, each has a separate purpose. Be more specific.
The purpose of a spring washer is to offer spring force, sustain a load, or provide a method to absorb shock. This is achieved through the design of the washer of which its namesake describes. Much like the shocks of a car the spring washer performs the same duty at a much smaller level.
The purpose of the U-bolts on a leaf spring is twofold. First, they allow room for the leaf springs, cradling them. Second they hold the leaf springs in place and attach them to the car, providing the structural support that makes them work.
The purpose of Holi is to celebrate the arrival of spring.
the spring scale is designed to measure the strength and flexibility of spring it is helpfull in many buisnesses :)
without the spring coil the electricity will not be supplied to the ignition of the car.
To improve handling by reducing body roll allowing the car to corner faster with more control. It is a torsion spring that attaches to (normally lower control arms of that axle, be it front/rear. As the car enters the turn, it starts to lean/roll, and the spring counteracts it.
Spring pocket, spring perch.
The purpose of the valve spring is to maintain contact between the components in the valve train, so the valve motion will follow the cam profile.
The spring supports the weight of the car and allows the suspension to move over bumps. The shock controls the movement of the spring so it doesn't keep bouncing.
Spring rate is the ammount of force it takes to compress a spring to a given height.
The purpose of car sponsorships in NASCAR is to gain more attraction and fans. In addition, the purpose of car sponsorships in NASCAR is to gain more support for race car sports.
The purpose of a car is to get from point A to point B with greater speed and lesser effort