If I remember correctly, I believe oil capacity is 32 qts.
The oil capacity for International 4300 dt466 from 1994 to current hold 30 quarts with filter. Those made before 1994 have smaller engines with the capacity to hold less oil.
8 gallons
The oil capacity is 30 quarts or 7.5 gallons.
It's takes 7 gallons or 28 quarts. The 4300 is the biggest and the filter alone holds 4 quarts (you must fill the filter with new oil to prime it.) Two 5 gallon buckets help with the extraction/recycling of old oil.
Well, honey, the oil capacity for a 1991 International 4700 DT 466 is approximately 30 quarts. Make sure you check your dipstick and add oil gradually to avoid overfilling. And for heaven's sake, don't forget to change your oil filter too!
No, it is an International engine.
34 quarts
The oil system on all DTs from '94 to current holds 30 Qts (nominal) including the filter. Some engines do have smaller capacity oil pans, but they are front-sump type pans (4x4 applications I think).
14% of 466 = 14% * 466 = 0.14 * 466 = 65.24
The International Harvester (IH) DT 466 engine typically holds around 10 to 12 quarts (approximately 9.5 to 11.4 liters) of coolant, depending on the specific model and configuration. It's essential to consult the engine's service manual for the exact capacity and any additional recommendations for your application. Always ensure the cooling system is properly filled and maintained for optimal performance.
4357345745873457 + 466 = 4357345745873923
466 / 2 = 233