0
Add your answer:
Earn +20 pts
What are the engine torque specs for a 1997 Kia sportage need head bolt and cam hold down bolts?
headbolt torque is : 62 ft/lb cam hold down bolts is : 13 to 20 ft/lb
How do you set torque wrench at 62lbs?
To set a torque wrench at 62 lbs, first make sure it is at zero. Then, turn the handle or knob on the torque wrench until the indicator lines up with the 62 lb mark on the scale. Once set, tighten the nut or bolt to reach the desired torque value.
Head torque pressure Honda civic 1500 lsi 1996?
There are two graduations which must be used when torquing head bolts for the 1996 Honda Civic LSI 1500. The first is 22 foot pounds of torque and the second is 62 foot pounds of torque.
What is Al Alburquerque's number on the Detroit Tigers?
Al Alburquerque is number 62 on the Detroit Tigers.
What are the head bolt torques for 1987 Chevy cavalier 2 liter engine?
3 steps in sequence, long bolts are 73-83 ft/lbs., short bolts are 62-70 ft/lbs. torque sequence is 8-4-1-5-9 7-3-2-6-10
Tightening torque for bolt size 12?
Torque is related to friction and diameter. torque usually is done to achieve a preload stress in the bolt of 50% of its ultimate strength For unlubricatd bolts, T= 0.2DP where D = diamter and P = bolt preload and T = torque Bolt preload stress = P/A where A is stress area of bolt #12 = 0.216 inch diameter, A = 0.024 For standard steel bolts of 80,000 psi strength, P = 1920/2 = 960 pounds T = 41 inch pounds For high strength bolts of 160,000 psi strength, T = 82 inch pounds If bolts are lubricated, use T = 0.15DP T = 31 in lbs standard and 62 inch pounds high strength
What was the record of the 1995 Detroit red wings?
62 - 13 - 7
What is the torque spec on the oil drain plug of a duramax diesel engine?
62 Lb-Ft
How much hp does the harley 96 ci have?
62 bhp and 96 ft/lbs of torque
Will 62 Ford Falcon seats fit a 64?
They are not a direct bolt on but they can be made to fit.
What is the difference between a Mod 62 and a Mod 62A Winchester?
A change in the breech bolt mechanism.
What is the bolt pattern on a 1962 catalina?
5x4.75 with a low offset around +0 to +10 Actually, unless my 62 is completely different the bolt pattern is 5X5.
