.025
How easy is it to replace a spark plug wire on a gas weed eater?
The gap setting for cj6y plug is.....027 From the maker of the plugs In Japan
To perform a weed eater spark plug replacement, first ensure the engine is cool. Locate the spark plug on the engine and use a spark plug wrench to remove it. Check the gap on the new spark plug and adjust if necessary. Install the new spark plug by hand, then tighten it with the wrench. Finally, reconnect the spark plug wire and test the weed eater to ensure it is running smoothly.
.025
.025
Your weed eater spark plug may not be firing due to issues such as a dirty or faulty spark plug, a disconnected or damaged spark plug wire, or a problem with the ignition system. It is important to check and replace the spark plug if needed, ensure the spark plug wire is connected properly, and troubleshoot the ignition system to resolve the issue.
Champion CJ8Y
The spark plug for a Stihl FS36 is a Bosch WSR6F gapped at .025
Champion CJ8 is most popular
The Sear's website recommends spark plug number DJ7Y, but the brand is not listed.
It means fuel is mix is not getting to the engine.
set it at .020 and you will be fine