how do you change drive belt on a ltx 1040 cub cadet
The drive belt on a Cub Cadet LX1040 is adjusted by turning a small bolt on the side of the cutting deck. It loosens or tightens the belt depending on the direction it is turned.
what model and which belt? If it is a 1000 series you have a transmission drive belt and a deck belt. I you have a 2000 series or higher or a cub cadet with an IH logo then you only have one belt the deck belt and no drive belt you have a drive shaft. So the model of the tractor and what belt needs to be given before the correct answer can be given.Phil
You can replace the drive belt on cub cadet RZT 50 by first making sure that the engine of the vehicle is turned off. Then you can pop open the hood and remove the belt.
Dont know either
please let me see a diagram of this
A-sect V belt 1/2 by 78 part # 954-0461
It's right on the deck
No the drive belt and Deck belt are two different belts, one powers the rear wheels, the other powers the deck. though if you are asking if they are the same belt as in same size, I don't know, you'll have to check your owners manual or talk to someone who repairs or can get parts for Cub Cadet mowers.
Which one? Blade = 754-04033 Transmission = 754-0461
I have a 1054 and just put a new drive belt on it. It has a spring loaded belt tension pulley and there is no adjustment. Check and see if the spring has broken or come off the pulley.
Should be 90 inch same as the 1315