answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is the difference between drive gear one and drive gear two?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is a gear drive?

In a vehicle, a driving gear is the gear which is driven by the engine. The driving gear helps control the speed the vehicle is in.


How does a 6-gear differ from 4-gear car?

the difference between a 6 gear and a 4 gear car is 2 gears one has 6 gears and one has 4 gears


What is difference between internal gear pump and extenal gear pumps?

one has external teeth the other has internal teeth


Difference between and Xbox360 and the cheaper Xbox?

One comes with no hard drive and one has 120GB hard drive.


What is the difference between a suburban V2500 and a suburban R2500?

the difference between the two is one is 4 wheel drive and the other is 2 wheel drive that's it. Don't know which one is which though.


What is total composite error of gear?

The difference between highest peak and the lowest valley of error line drawn when the gear is rotated by one revolution by a master gear in tight mesh.


What is the difference between a parmanent hard disk drive and a removable hard disk drive?

THE DIFFERENCE BETWEEN A PERMANENT HARD DISK DRIVE AND A REMOVABLE HARD DISK DRIVE A permanent drive is in housed in the system while the removable one is externally fixed. Basically they perform the same functions.


Who can drive a 6 gear car?

any one who knows how to drive 6 gears can drive a 6 gear car .Most people who can drive a manual car can drive a 6 geared car.


What is the difference between a Solid-state Drive and a computer processor?

one is a hard drive and one is the cpu.......ssd=storage.......processor(cpu)=crunches the data.....


Why do gears have a gear ratio?

When one gear is used to drive another, the number of teeth on each gear will factor into the ratio. Even if the number is the same it will have a 1 to 1 ratio. In a rear axle, for example, a common ratio is 41 teeth on the ring gear (driven gear) and 11 teeth on the pinion gear (drive gear). 41/11 is 3.727272 or commonly called a 3.73 to 1 ratio. It take 3.73 turns of the drive gear to get one turn of the driven gear. If you are interested, the different ratios provide different combinations of speed and power. Thus a large gear pulling a smaller one gives speed while a smaller gear pulling a larger one gives power.


What is the difference between a gear pump and a lobe pump?

A major difference between lobe and gear pumps is that the rotors are designed to remain in close contact throughout rotation. By close contact, I mean that the lobes rotate about one another at extremely close tolerances. Also, unlike the gear pump, the rotors of the lobe pump do not mesh


In what gear should you drive when going down a steep hill?

One gear down from normal road gear, but remember the transmission is not meant to be a brake.