Cylinder diameter is the Bore.
Bore is 73.0 mm (2.87401575 inches)Stroke is 77.4 mm (3.07424409 inches)
30 NM 50 NM then 90°
YES!! get it changed. The 2e is an interference engine. I have one in my Corolla and I know of several 2e engines that have bent valves and damaged rockers when the belt broke.
80 100
yes
30 NM 50 NM then 90°
I am putting 3 liters on my xe. it is exactly in its full gauge.
80 and 100
To set the carburetor on a Toyota E engine 1300, you must have the tools to open the bolts. Refer to the pictorial image from the manual to set the carburetor.
There are torque specifications for every bolt in a Toyota Corolla 1.3 L engine. The head bolt torque specifications is 70 pounds.
Well, honey, the flywheel torque setting for a Toyota 2E engine is typically around 87-101 Nm. But hey, if you're gonna be messing around with flywheels, make sure you double-check that spec in the manual. Wouldn't want your engine falling out on the highway now, would we?
hi most toyota engines fit almost any toyota car just got to do some mods with them like change harness and mounts position depending on if your chaing from 1300cc to 1600cc and things like that
The tappet settings for a 2001 Toyota Tazz with a 2E engine are typically 0.15 mm (0.006 in) for the intake valves and 0.20 mm (0.008 in) for the exhaust valves when the engine is cold. It's important to ensure proper clearance to maintain engine performance and prevent valve damage. Always refer to the vehicle's service manual for the most accurate specifications and adjustment procedures.