0
MY Mercruiser 502 8.2L V8 between 133-155 pounds pressure dry, not warmed up & throttle at idle instead of wide open throttle. I was comparing the difference between the cylinders seeing if anything was obvious bad...
Warmed up... Open throttle valve will give you a higher reading.
What else can I help you with?
How many liter per hour of fuel consumption of 6.2 mpi mercruiser engine?
10
Is my 2011 vw tiguan an mpi engine?
is my 2011 vw tiguan tsi an mpi
What does MPI on your Skoda mean?
MPI on your Skoda stands for Multi-Point Injection, which is a fuel injection system used in many Skoda vehicles. This technology ensures that fuel is injected into each cylinder at multiple points during the engine cycle, improving combustion efficiency and overall engine performance. MPI systems help enhance fuel economy and reduce emissions, contributing to a cleaner and more efficient engine operation.
What does MPI mean when referring to a V6 engine?
Mulit Port Injection. It means the fuel is injected into each cylinder rather than just at one point.
What is MPI engine in Chrysler 300?
2.7 v6
How do you set timing on a 1998 7.4 mpi and show timing marks on balancer?
To set the timing on a 1998 7.4 MPI engine, first ensure the engine is at TDC (Top Dead Center) on the compression stroke for cylinder 1. Use a timing light to illuminate the timing marks on the harmonic balancer and the timing tab. The correct timing specification for this engine is typically around 0 degrees BTDC (Before Top Dead Center), but refer to the specific service manual for exact settings. Adjust the distributor as needed to align the timing mark with the specified degree on the tab.
What does MPI mean when referring to an engine?
Multi Port Injection
Is a Saturn Ion 2.2L 14 mpi engine an interference engine?
yes you are screwed if the chain breaks
Merccruser 350 engine MPI 2006 does the cam have a lobe for a mechanical fuel pump?
MPI's usually have electric fuel pumps to put out the pressure needed. so no lobe.
What is a MPI?
MPI stands for multiport injection.
Mpi system which is proper pressure in fuel kgcm?
The year, make, model and engine info needed.
What the meaning of MPI in welding?
The meaning of MPI in welding is Magnetic Particle Inspection.
