If you're referring to The "Cowling" on and airplane, it's the outside of the engine Metal Case) that protects it from the elements and makes the engine aerodynamic. It also facilitates air-flow into the intake.
The cowl panel on an automobile/truck is the area below the windshield.
on the cowl ... where else
The cowl is the black panel in front of / below the windshield - the wiper arms poke through it. See "Related Questions" below for more
no
A car has many panels such as a door panel, a header panel, a rocker panel, cowl panel, need more info to answer that Q.
removetheoldputnewon
To remove the cowl on a 2007 Mustang, first, ensure the hood is open and then remove the windshield wiper arms by loosening their nuts and lifting them off. Next, unscrew the cowl panel by removing the screws and clips securing it to the windshield and the body. Carefully lift the cowl panel away from the windshield, taking care not to damage the weather stripping or any attached components. Finally, set the cowl aside for access to the area underneath.
That would be the panel between the bottom of the windshield and the rear of the engine compartment hood.
To change the rear spark plugs the cowl panel must first be removed. Take off the wiper blades, then with the hood open remove the cowl panel. The plugs are fairly easy to get to once the panel is removed.
To reseal the screen under the cowl of a 2003 Town Car, first, remove any screws or clips securing the cowl panel and carefully lift it off. Clean the surface and any old sealant from the screen and cowl area. Apply a suitable weather-resistant sealant or gasket material along the edges of the screen, then reattach the cowl panel, ensuring it fits snugly. Finally, secure it with the screws or clips you previously removed.
It is called the 'Scuttle panel' or the cowl.
Cowl panel
To remove the upper dash and cowl panel on a 1980 Firebird, start by disconnecting the battery and removing the trim pieces around the dashboard. Next, unscrew any bolts or screws securing the upper dash to the car, typically located near the windshield and on the sides. Carefully pry off the panel, ensuring you disconnect any wiring harnesses or clips attached to it. Finally, lift the panel away from the cowl area to fully remove it.