0
Depends on the vehicle and what the labor rate is near you.Canister purge valves are generally located on or near the engine and usually easy to get to.
Canister vent valves are located underneath the vehicle near the fuel tank and can be harder to get to thus more costly to replace.
Add your answer:
Earn +20 pts
What is evap emission comtrol system purge valve on a 2003 ranger 4-cylinder?
The purge valve is component to a vehicle's evaporative emissions system. For a 2003 Ford Ranger with the 2.3L L4 the vapor canister purge valve is Motorcraft part# CX2127. As of 2014 the wholesale cost for this part number is around 60$.
Cost of replacing a egr valve?
The cost of replacing an EGR valve varies with the make, model and location of the car. An EGR valve for a 1996 Lincoln Town Car is about $160.
Emission system light Ford Escape hybrid?
some have defected purge valve that ruins the evaportive canister on ford escapes, thisis only covered under 3/36,000 mile warranty. average cost to repair, 400 dollars.
What is the Labor cost for replacing the EGR valve on a 1999 Acura CL?
$30
1996 Ranger failed emissions test with code P1443 what is the problem and estimate cost to repair?
The code P1443 for the 1996 Ranger means that there is a problem with the EVAP Pressure Sensor. The real culprit might be the Vapor Canister Purge Valve since the EVAP Pressure Sensor rarely fails. The VCP Valve is around $60. Before purchasing this part, check all hoses around it for leaks.
Cost of replacing egr valve in 2006 ford escape?
About $60 for the part. Labor depends on your location
P0441 evap leak does this cost a lot to fix you did replace the gas cap however the light came back on so you know that it is a leak somewhere in the EVAP system so you will need to get it fixed?
It depends on what failed. Here is a list of possibilities. Bad vacuum switch, damaged EVAP line/canister, open in PCM circuit, open or short in voltage feed circuit to purge solenoid, faulty purge solenoid, restriction in EVAP solenoid, line or canister, corrosion in purge connector, or a bad PCM.
How much does a expansion valve for ac in home cost?
There is no easy answer on this, providing your replacing the original valve your going to need make, and model number of the ac system to start; don't forget to do a pump down and retrieval, before removing the valve.
How much does it cost to repair a charcoal canister on a 2006 dodge charger?
How much would it cost to repair a charcoal canister on a 2006 dodge charger
How would you fix a burned valve in a 1987 Pontiac fiero gt and how much would it cost?
You need to replace the valve, which will require removing the head. While there, make sure that the valve seats are undamaged, and since it is apart, you are better off replacing all the valves, as well as the valve stem seals. Check the price of valves, as they can get expensive, but most of your cost will be labor.
How much would it cost to replace the charcoal canister on a 2002 Hyundai?
It can cost as much as about $300 to replace the charcoal canister on the 2002 Hyundai. This varies according the mechanic labor pricing in your area. The canister averages around $100 to $150.
How much does it cost to replace valve seals?
When asked from a mechanic about replacing the valve seals on a 5.0 V8 mustang engine, i was quoted 300-400. I have yet to take him up on that offer. This is in the 20164 zip code area.
