The Bore of an engine is the tube that the piston goes up and down in.
what determines when should bore and engine
std bore is 4.050
The Bore of a 350 cid engine is 4.00, the stroke is 3.48 inch..
4.000" the engine bore size
4"
yes
Primarily the bore size. The 305 has a bore of 3.74 and the 350 is a 4.0 bore. They share the same stroke on the crank. And no, you can't bore a 305 to a 4.0 bore.
.7853x bore x bore x stroke x #of clyinders
I assume you mean engine displacement? To calculate engine displacement, use this formula: Bore x bore x stroke x .7854 x number of cylinders.
Engines are classified as small bore or large bore based on the diameter of their cylinders. Typically, a small bore engine has a cylinder diameter of less than 100 mm, while a large bore engine has a diameter greater than 100 mm. This classification affects the engine's performance characteristics, including power output, fuel efficiency, and torque characteristics, with large bore engines often providing higher power and torque at lower RPMs.
90mm
bore is the diameter of the piston and stroke is the length the piston moves in the cylinder.for example if bore x stroke is 1x3 then 1 is the diameter of the piston and 3 is the length of the cylinder.if bore is greater than stroke then it is a short stroke engine.