There are a number of easy do-it-yourself ways to repair a dent that have worked for people. The best method largely depends on the type of dent. One way is to use dry ice or a hair drier on the dent. This can remove small dents. Another way is to use a toilet plunger to pull out a dent. A third way is to take a hammer to the inside of a dent and gently tap it out. When using any of these methods, one must inspect for paint damage and repair that as well with some matching touch up auto paint. Otherwise, the paint damaged spots can begin to rust.
Compressed air can remove a dent in a car very quickly, Youtube has videos of how this can be done. Another way is to apply dry ice which is a very inexpensive alternative.
Generally the best way to repair a car dent, if you have the money, is to let your local mechanic handle it. If you feel confident enough to handle it yourself you can find a variety of kits available at stores like Walmart and NAPA.
The best way to remove rust from a chrome with bodywork is to take your car to an autobody shop. They are the best people that can remove rust from chrome.
Put it in warm/hot water. I have done this before. The heat cause the air inside to expand and pop it out. The dent will pop out, but the surface still has a slight imperfection from the dent. It won't be as good as original.
Small dents in automobile bumpers can sometimes be repaired simply with either a hair dryer, a hammer, or a toilet plunger. Larger dings in the bumper may require a trip to your dealership.
What is Ben Dent? Ben Dent is me, the best boy on earth he is the fastest typer in the earth, oh and by the way Tyler is a big gay.
bleach
If this is a tiny dent there is a way to shrink and massage the metal to repair without damaging the paint. It requires skill and practice. There are companies that specialise in this type of paint-less dent removal. If it has damaged the paint or is to large for the dent removal system you take a hammer and dolly (small hand held anvil) and pound the dent flat and repair the paint.
Depending on how large it is and if the metal is creased or not, you can simply remove the dent by using s large suction cup and pull it out. If there is an actual crease in the dent, then other methods would have to be used.. Tapping it out from the inside by removing the inner door panel then shaping and finally filling and repainting. OR you could call a local Paintless dent repair company and let them decide the best way. Good Luck.
a very good and cheap way is to place dry ice on the dent, it will retract the dent and make it go back into shape once it resumes its normal temperature. a very good and cheap way is to place dry ice on the dent, it will retract the dent and make it go back into shape once it resumes its normal temperature.
You just unhook it remove and put the new one in.
The best way to do that is open the door borrow another car, and drive into it its the fastest way to remove the door, then the rest is simple